5
2 Getting Started
Installing the Battery
b
a
1.
2.
3.
Installing the UIM Card
If the phone is powered on, press and hold for two seconds to
power off it. Then, remove the battery.
1.
2.
Charging the Battery
1.
Connect the travel charger to the charger interface at the bottom of
your phone.
2. Connect the charger to an AC power socket.
3. Wait until the phone is fully charged. During the charging, the
icon on the upper right corner of the screen is in an animated status.
4. When the animation becomes static, the charging finishes.
Disconnect the charger from the AC power socket.
5. Press the gray buttons on both sides of the charger connector to
disconnect it from the phone.
To Next Page
Loading...
