Huawei DG8245V - LAN, VoIP, and USB Indicators; Ports and Buttons; Device Ports; Device Buttons

CHECK ON
THE BASE OF
ROUTER
Wireless Security Settings
Wireless Network Name (SSID)
SSID 5G: Huawei - 5G - N3Ka
SSID 2.4G: Huawei - 2.4G - N3Ka
Wireless LAN Key
abcdeijk
0800 GET NOW
help@nownz.co.nz
YOUR OPTICAL
NETWORK TERMINAL
Your ONT (Optical
Network Terminal) will
have been installed on
an internal wall by the
fibre technician.
Connections A, B, C and
D will have been made.
Optical fibre connection.
Power supply.
Ethernet cable (blue) plugged into GE1 on your ONT, and
connected to the WAN port on your router.
POTS1 supplies your NOW phone line (if applicable). This is
connected to either your phone or the back-feed jack point
installed by the fibre technician.
A
B
C
D
PO TS 1 PO TS 2 RESE T GE 1G E2 GE 3G E4 PO WE R
ABCD
STEP1:
YOUR ONT
SETUP
Power supply.
Ethernet cable plugged
into WAN port on your
router, and connected to
GE1 on the ONT.
Yellow Ethernet ports
to connect your PCs
and other network
(yellowcable).
The Phone1, Phone 2 and
DSL ports are not used for
a fibre connection.
E
F
G
H
CONNECTING YOUR WIRELESS DEVICES TO THE ROUTER
The router comes shipped with the wireless fuction enabled so
there is no configuration necessary in order to use the wireless.
1. Ensure Wi-Fi is enabled on your device (eg. computer/
smartphone/gaming console).
2. Scan for wireless networks in your area and connect to the
network name that matches the wireless network name found
on the base of your router.
3. When prompted for your wireless security settings, enter the
wireless LAN key listed on the base of your router.
E
F GH H
STEP2:
YOUR ROUTER
SETUP
CONNECTING TO FIBRE