7
3. Follow the prompts of the installation wizard.
4. After the program is installed, the shortcut icon of the management program is displayed on
the desktop.
Launching the Management Program
After the E180 is installed, the management program is launched automatically. Then every time the
E180 is connected to the PC, the management program is launched automatically.
You can also double-click the shortcut icon on the desktop to launch the management program.
Uninstalling the Management Program
1. Choose Start > Control Panel.
2. Find the management program, and click Add/Remove Program to uninstall the management
program.
Note: It is recommended to restart the PC after the uninstallation to ensure that the management
program is completely uninstalled.
Removing the E180
1. Double-click in the system tray. The Unplug or Eject Hardware interface is displayed.
2. Select the hardware related to the E180 and click Stop.
3. When the prompt "It is safe to remove the device" is displayed, remove the E180.
Note: Before removing the E180, exit the management program.
To Next Page
Loading...
