Settings and Information Query
HUAWEI
43
2. Select the Network tab page to display the Network dialog box.
3. In the Choose Connection Type frame, select a type and a band.
4. Click Setting to save the network connection type.
All the connection types and their descriptions are listed below:
Parameter Description
Band Select one to network connection bands. There
are three selections: All Band, GSM 1900,
GSM900/1800/WCDMA2100.
Choose Connection
Type
Select one of network connection types.
GPRS/EDGE Preferred If you select this option, the Data Card first
selects GPRS/EDGE network when possible.
3G Preferred If you select this option, the Data Card first
selects 3G network when possible.
GPRS/EDGE Only If you select this option, the Data Card only
selects GPRS/EDGE network.
3G Only If you select this option, the Data Card only
selects 3G network.
Select Network Searching Modes
You can set the network searching as manual or auto mode. The settings
include:
Auto Network Searching
After you select connection types, you can set the Data Card to search for a
network automatically, and register to the carrier of the Data Card.
1. Click to display the Setting interface.
2. Select the Network tab page to display the Network dialog box.
3. Click Auto Choose Network to finish settings.
To Next Page
Loading...