HUAWEI
55
12 FAQ on HUAWEI 3G Data
Card
How to Judge Whether the HUAWEI 3G Data Card has been
Installed Correctly?
After installing the HUAWEI 3G Data Card, two devices are displayed in the
device management, namely, the “HUAWEI Mobile Connect-3G Modem”
and the “HUAWEI Mobile Conncet-3G Application Interface”.
Check whether these two devices are installed correctly at first. If a yellow
exclamatory mark or other signs appear in front of the devices, it means that
the HUAWEI 3G Data Card has not been installed correctly, and you must
retry.
After the Data Card Management Software is installed, the Data
Card Management Always Prompts “Data Card not Exit”. Why?
You have probably inserted the Data Card before the completion of installing
the Data Card Management. Pull out the Data Card and insert it after the
installation of the Data Card Management is completed. Then, install the
HUAWEI 3G Data Card hardware driver by following the guide for
hardware installation.
What Shall I Do if I cannot Access the Internet?
1. Check whether you have activated the wireless online service at first.
You can ask the local network carrier on how to activate it.
2. If you affirm that the wireless online service has been activated, refer to
the section of “Internet Service” to implement relevant settings.
Only Part of the Message is Displayed After I Use the “Paste”
Function to Edit it. Why?
While editing the message, at most 500 English characters are supported in
the text. If the quantity of the pasted information exceeds the limitation, the
exceeding part will be deleted automatically.
To Next Page
Loading...