Product Brochure
Huawei Enterprise S2700 Series Switches
6
Item S2700-EI S2700-SI
Security
802.1x authentication and limit on the number 
of users on an interface
Dynamic ARP detection
IP source guard
N/A 
AAA authentication, RADIUS authentication, 
HWTACACS authentication, and NAC
Binding of the IP address, MAC address, 
interface, and VLAN
Port-based rate limiting 
Port isolation, port security, and sticky MAC
Packet filtering
Packet filtering based on MAC addresses 
Suppression of multicast, broadcast, and 
unknown unicast packets
Limit on the number of learned MAC addresses
CPU defense
Port isolation
Suppression of multicast, broadcast, and 
unknown unicast packets
CPU defense
Surge 
protection
All service ports have a surge protection capability of 6 KV, which can be increased to 15 KV 
when using additional surge protection devices.
Device 
management
Stacking
Auto-Config
CLI-based configuration
Remote configuration using Telnet
SNMP V1/V2/V3
RMON 
HGMP v2
SSHv2
Web-based device management
GVRP
Operating 
environment
Operating temperature: 0
O
C–50
O
C (long term); -5
O
C–55
O
C (short term)
Relative humidity: 10%–90% (non-condensing)
Power 
supply
AC:
Rated voltage range: 100 V to 240 V AC, 50/60 Hz
Maximum voltage range: 90 V to 264 V AC, 50/60 Hz
DC:
Rated voltage range: –48 V to –60 V DC
Maximum voltage range: –36 V to –72 V DC
Note: PoE-support switches do not use DC 
power supplies.
N/A
Dimensions 
(W x D x H)
S2700-9TP-EI/SI: 250 mm x 180 mm x 43.6 mm
S2700-9TP-PWR-EI: 320 mm x 220 mm x 43.6 mm
S2700-18TP-EI/SI, S2700-26TP-EI/SI: 442 mm x 220 mm x 43.6 mm
S2710-26TP-PWR-SI/S2700-26TP-PWR-EI: 442 mm x 420 mm x 43.6 mm
S2710-52P-SI/S2700-52P-EI: 442 mm x 220 mm x 43.6 mm
S2710-52P-PWR-SI/S2700-52P-PWR-EI: 442 mm x 420 mm x 43.6 mm