Need help?Do you have a question about the Huawei Quidway S2000-EI Series and is the answer not in the manual?
General| Series | Quidway S2000-EI Series |
|---|---|
| Category | Switch |
| Switch Type | Managed |
| MAC Address Table | 8K |
| VLANs | 4K |
| Operating Temperature | 0°C to 45°C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Storage Humidity | 5% to 95% (non-condensing) |
| Ports | 24/48 |
| Uplink Ports | 1000Base-X ports |
| Power Supply | AC 100-240V, 50/60Hz |
| Dimensions (W x D x H) | 442 mm x 220 mm x 43.6 mm |
| Dimensions | 442 x 300 x 44 mm |
| Weight | 3.5 kg |
| Storage Temperature | -40°C to +70°C |
| Jumbo Frame | 9216 bytes |
Details on the S2008-El Ethernet Switch, including its appearance and views.
Details on the S2016-El Ethernet Switch, including its appearance and views.
Details on the S2403H-El Ethernet Switch, including its appearance and views.
Technical specifications for the S2000-El series Ethernet Switches.
Important safety and handling precautions before installing the switch.
Environmental conditions and requirements for proper switch installation and operation.
List of essential tools required for the installation process.
Steps for mounting and installing the S2008-El Ethernet Switch.
Procedure for connecting the external power supply to the S2008-El.
Steps for mounting the S2016-EI and S2403H-EI switches.
Connecting power cords and ground wires for S2016-EI/S2403H-EI.
Instructions for connecting the console cable for management.
Procedures for installing and removing optional interface modules.
Final checks to ensure the switch installation is correct.
Setting up the PC and console connection for initial configuration.
Physical connection steps for the console cable.
Configuring terminal emulation software parameters for connection.
Procedure for powering on the switch for the first time.
Overview of methods for loading BootROM and host software.
Steps for loading software via the console port (XModem, TFTP, FTP).
Methods for loading software remotely using FTP or TFTP.
Troubleshooting common issues during software loading.
Procedure for handling lost BootROM or user passwords.
Diagnosing and resolving power system failures.
Troubleshooting issues with terminal display or configuration.
Details on 1-port 100Base-FX fiber optic modules.
Details on the 1-port 100Base-T PoE interface module.
Installing surge protection for AC power connections.
Installing surge protection for network cable connections.
To Next Page