About This Manual
Release Notes
The corresponding product version of this manual is VRP3.10.
Related Manuals
The related manuals are listed in the following table.
Manual Content
Quidway S2000-EI Series Ethernet
Switches Operation Manual
Introduces such modules as getting started, port, VLAN,
network protocols, multicast protocols, QoS/ACL,
integrated management, STP, security, and system
management.
Quidway S2000-EI Series Ethernet
Switches Command Manual
Introduces the commands of such modules as getting
started, port, VLAN, network protocols, multicast protocols,
QoS/ACL, integrated management, STP, security and
system management.
Organization
Quidway S2000-EI Series Ethernet Switches Installation Manual mainly introduces the
hardware features, installation, configuration and maintenance of S2000 EI Series
Ethernet Switches. To avoid any possible device damage and personal injury before
the installation and during the installation, please read the manual carefully. The
manual consists of the following chapters.
z Chapter 1 Product Overview
The chapter gives a brief introduction to S2000-EI Series Ethernet Switches.
z Chapter 2 Installation Preparation
The chapter introduces such topics as the environmental requirements of S2000-EI
Series Ethernet Switches, the instructions for the installation, the installation tools and
so on.
z Chapter 3 Installation
The chapter introduces the installation of the S2000-EI Series Ethernet Switches, module
installation, connections of the power cable, ground wire and the console cable.
To Next Page
Loading...
Need help?
General