Huawei Quidway S2000-EI Series

Installation Manual
Quidway S2000-EI Series Ethernet Switches Chapter 1 Product Overview
1-4
1.1.3 Rear View
I. Rear panel
On the S2008-EI rear panel distribute external power input and Console port (see the
following figure):
(1) (2)(1) (2)
(1) Power input (2) Console port
Figure 1-3 S2008-EI rear panel
The S2008-EI is powered using an external power supply that works with the
following specifications:
Rated voltage range: 100-240 V a.c., 50/60 Hz
Max. voltage range: 90-264 V a.c., 50/60 Hz
II. Console port
S2008-EI provides a Console port, which is an asynchronous serial port compliant
with EIA/TIA-232. Through this port, you can configure the switch at the local or
remotely.
Table 1-4 Console port attributes
Attribute Description
Connector RJ-45
Port standard Asynchronous EIA/TIA-232
Baud rate 9600 bps (default )
Service supported
z
Connection to the ASCII terminal
z
Connection to the serial port of a local terminal (which can be a PC) or a
remote terminal (through a pair of Modems) and running terminal
emulation program on the connected terminal