Need help?Do you have a question about the Huawei Quidway S5700 Series and is the answer not in the manual?
General| Category | Switch |
|---|---|
| Operating Temperature | 0°C to 45°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Series | Quidway S5700 |
| Forwarding Performance | Up to 96 Mpps |
| Ports | 24 or 48 x 10/100/1000Base-T ports |
| Power Supply | AC or DC |
| Storage Temperature | -40°C to 70°C |
| Fixed GE Ports | 24 or 48 |
| Uplink Ports | 4 x GE SFP ports |
| Routing Protocols | RIP, OSPF, BGP |
| Management | SNMP, RMON, CLI, Web |
| VLAN | 4094 VLANs |
| PoE | Optional |
Details configurations on a managed device for SNMPv1 communication with an NM station.
Details configurations on a managed device for SNMPv2c communication with an NM station.
Details configurations on a managed device for SNMPv3 communication with an NM station.
Provides step-by-step instructions for configuring LLDP on network devices.
Provides procedures for configuring basic HGMP functions to create and manage a cluster.
Describes advanced HGMP functions to simplify cluster management and maintenance.
Provides steps to configure basic NTP functions, including server/client, peer, broadcast, and multicast modes.
Describes how to configure NTP access authority and authentication for secure clock synchronization.
Describes how to configure an ICMP test to check IP network connectivity.
Details how to configure an HTTP test to check the responding speed of HTTP services.
Explains how to configure a TCP test to check the responding speed of a TCP port.
Explains how to configure a jitter test to check jitter on the network.
To Next Page