Huawei Quidway S5700 Series User Manual

Prerequisite
The configurations of the FTP Download Test function are complete.
Context
NOTE
NQA test results cannot be displayed automatically on a terminal. You must run the display nqa results
command to view test results. By the default, the command output contains the records about only the last
five tests.
Procedure
Step 1 Run the display nqa results [ test-instance admin-name test-name ] command to view the test
results on the NQA client.
----End
Example
Run the display nqa results command. If the test is successful, the following is displayed.
l "CtrlConnTime"
l "DataConnTime"
l "SumTime"
<Quidway> display nqa results
NQA entry(admin, ftp) :testflag is inactive ,testtype is ftp
1 . Test 1 result The test is finished
SendProbe:1 ResponseProbe:1
Completion :success RTD OverThresholds number: 0
MessageBodyOctetsSum: 448 Stats errors number: 0
Operation timeout number: 0 System busy operation number:0
Drop operation number:0 Disconnect operation number: 0
CtrlConnTime Min/Max/Average: 438/438/438
DataConnTime Min/Max/Average: 218/218/218
SumTime Min/Max/Average: 656/656/656
Average RTT:380
Lost packet ratio: 0 %
6.7 Configuring the FTP Upload Test
This section describes how to configure an FTP upload test to check the FTP upload performance.
6.7.1 Establishing the Configuration Task
Before configuring an FTP upload test, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the required data. This can help you complete
the configuration task quickly and accurately.
Applicable Environment
In an FTP upload test, the local device functions as an FTP client, intending to upload the
specified file to an FTP server.
The test result contains the statistics about each FTP phase, including the time to set up an FTP
control connection and the time to transport the data.
Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management 6 NQA Configuration
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
265

Huawei Quidway S5700 Series Specifications

General

Category	Switch
Operating Temperature	0°C to 45°C
Relative Humidity	5% to 95% (non-condensing)
Series	Quidway S5700
Forwarding Performance	Up to 96 Mpps
Ports	24 or 48 x 10/100/1000Base-T ports
Power Supply	AC or DC
Storage Temperature	-40°C to 70°C
Fixed GE Ports	24 or 48
Uplink Ports	4 x GE SFP ports
Routing Protocols	RIP, OSPF, BGP
Management	SNMP, RMON, CLI, Web
VLAN	4094 VLANs
PoE	Optional