Huawei Quidway S5700 Series User Manual

Example
Run the display nqa results command. If the following is displayed, it means that the test is
successful.
l "testFlag is inactive"
l "The test is finished"
l "Completion:success"
For the ICMP test, you can also view the minimum time, maximum time, and RTT(Round Trip
Time ).
<Quidway> display nqa results
NQA entry(admin, test) :testflag is inactive ,testtype is icmp
1 . Test 1 result The test is finished
Send operation times: 3 Receive response times: 3
Completion:success RTD OverThresholds number: 0
Attempts number:1 Drop operation number:0
Disconnect operation number:0 Operation timeout number:0
System busy operation number:0 Connection fail number:0
Operation sequence errors number:0 RTT Stats errors number:0
Destination ip address:10.112.58.3
Min/Max/Average Completion Time: 2/5/3
Sum/Square-Sum Completion Time: 9/33
Last Good Probe Time: 2010-06-21 15:33:09.2
Lost packet ratio: 0 %
6.6 Configuring the FTP Download Test
This section describes how to configure a File Transfer Protocol (FTP) download test to check
the FTP download performance.
6.6.1 Establishing the Configuration Task
Before configuring an FTP download test, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the required data. This can help you complete
the configuration task quickly and accurately.
Applicable Environment
In an FTP download test, the local device functions as an NQA FTP client, intending to download
the specified file from an FTP server.
The test result contains statistics about each FTP phase, including the time to set up an FTP
control connection and the time to transport the data.
Pre-configuration Tasks
Before configuring the FTP download test, complete the following tasks:
l Configuring the FTP user name and password and the login directory
l Configuring routes between the NQA FTP client and the FTP server
Data Preparation
To configure the FTP download test, you need the following data.
Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management 6 NQA Configuration
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
262

Huawei Quidway S5700 Series Specifications

General

Category	Switch
Operating Temperature	0°C to 45°C
Relative Humidity	5% to 95% (non-condensing)
Series	Quidway S5700
Forwarding Performance	Up to 96 Mpps
Ports	24 or 48 x 10/100/1000Base-T ports
Power Supply	AC or DC
Storage Temperature	-40°C to 70°C
Fixed GE Ports	24 or 48
Uplink Ports	4 x GE SFP ports
Routing Protocols	RIP, OSPF, BGP
Management	SNMP, RMON, CLI, Web
VLAN	4094 VLANs
PoE	Optional