Huawei Quidway S5700 Series User Manual

#
return
6.27.5 Example for Configuring the DNS Test
Networking Requirements
As shown in Figure 6-7, Switch functions as the DNS client to access the host whose IP address
is 10.2.1.1/24 through a domain named server.com.
Figure 6-7 Networking diagram for configuring the DNS test
Switch
GE0/0/1
VLANIF100
10.1.1.1/24
server.com
10.2.1.1/24
IP
Network
10.3.1.1/24
DNS Server
10.1.1.2/24
Configuration Roadmap
The configuration roadmap is as follows:
1. Configure the Switch as the NQA client.
2. Create and perform the DNS test on the Switch to check whether a connection between the
Switch and the DNS server can be set up and to check the speed of responding to an address
resolution request.
Data Preparation
To complete the configuration, you need the following data:
l IP address of the DNS server
l Name of the host to be accessed
Procedure
Step 1 Configure reachable routes between Switch A and the DNS server, between Switch A and the
host to be accessed, and between the DNS server and the host to be accessed. The configuration
details are not mentioned here.
Step 2 Create an NQA DNS test.
<Quidway> system-view
[Quidway] dns server 10.3.1.1
[Quidway] nqa test-instance admin dns
Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management 6 NQA Configuration
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
343

Huawei Quidway S5700 Series Specifications

General

Category	Switch
Operating Temperature	0°C to 45°C
Relative Humidity	5% to 95% (non-condensing)
Series	Quidway S5700
Forwarding Performance	Up to 96 Mpps
Ports	24 or 48 x 10/100/1000Base-T ports
Power Supply	AC or DC
Storage Temperature	-40°C to 70°C
Fixed GE Ports	24 or 48
Uplink Ports	4 x GE SFP ports
Routing Protocols	RIP, OSPF, BGP
Management	SNMP, RMON, CLI, Web
VLAN	4094 VLANs
PoE	Optional