Huawei Quidway S5700 Series User Manual

The test instance is started after a certain delay.
----End
6.14.4 Checking the Configuration
After configuring the jitter test, you can view the test result.
Prerequisite
The configurations of the Jitter Test function are complete.
Context
NOTE
NQA test results cannot be displayed automatically on a terminal. You must run the display nqa results
command to view test results. By the default, the command output contains the records about only the last
five tests.
Procedure
l Run the display nqa results [ test-instance admin-name test-name ] command to view the
test results on the NQA client.
l Run the display nqa-server command to view the information about the NQA server.
----End
Example
Run the display nqa results command. If the test is successful, the following is displayed.
<Quidway> display nqa results test-instance admin jitter
NQA entry(admin, jitter) :testflag is inactive ,testtype is jitter
1 . Test 1 result The test is finished
SendProbe:60 ResponseProbe:60
Completion:success RTD OverThresholds number:0
Min/Max/Avg/Sum RTT:1/1/1/60 RTT Square Sum:60
NumOfRTT:60 Drop operation number:60
Operation sequence errors number:0 RTT Stats errors number:0
System busy operation number:0 Operation timeout number:0
Min Positive SD:1 Min Positive DS:1
Max Positive SD:1 Max Positive DS:1
Positive SD Number:15 Positive DS Number:1
Positive SD Sum:15 Positive DS Sum:1
Positive SD Square Sum:15 Positive DS Square Sum:1
Min Negative SD:1 Min Negative DS:1
Max Negative SD:1 Max Negative DS:1
Negative SD Number:15 Negative DS Number:1
Negative SD Sum:15 Negative DS Sum:1
Negative SD Square Sum:15 Negative DS Square Sum:1
Min Delay SD:0 Min Delay DS:0
Avg Delay SD:27 Avg Delay DS:1
Max Delay SD:1 Max Delay DS:1
Packet Loss SD:0 Packet Loss DS:0
Packet Loss Unknown:0 jitter out value:0.0312500
jitter in value:0.0020833 NumberOfOWD:60
OWD SD Sum:27 OWD DS Sum:1
TimeStamp unit: ms
Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management 6 NQA Configuration
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
291

Huawei Quidway S5700 Series Specifications

General

Category	Switch
Operating Temperature	0°C to 45°C
Relative Humidity	5% to 95% (non-condensing)
Series	Quidway S5700
Forwarding Performance	Up to 96 Mpps
Ports	24 or 48 x 10/100/1000Base-T ports
Power Supply	AC or DC
Storage Temperature	-40°C to 70°C
Fixed GE Ports	24 or 48
Uplink Ports	4 x GE SFP ports
Routing Protocols	RIP, OSPF, BGP
Management	SNMP, RMON, CLI, Web
VLAN	4094 VLANs
PoE	Optional