EasyManuals Logo

Huawei Quidway S5700 Series User Manual

Huawei Quidway S5700 Series
415 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
l If the functions such as accounting and fault location need to be bound to specified
interfaces to prevent changes in interface indexes during device or interface restart, follow
the procedure described in Configuring the Constant Interface Index Feature.
1.2.3 (Optional) Controlling the NM Station's Access to the Device
This section describes how to specify an NM station and manageable MIB objects for SNMP-
based communication between the NM station and managed device to improve communication
security.
Context
If a device is managed by multiple NM stations that use the same community name, note the
following points:
l If all the NM stations that use the community name need to have rights to access the objects
in the Viewdefault view (1.3.6.1), skip the following steps.
l If some of the NM stations that use the community name need to have rights to access the
objects in the Viewdefault view (1.3.6.1), skip Step 5.
l If all the NM stations need to manage specified objects on the device, skip Steps 2, 3, and
4.
l If some of the NM stations that use the community name need to manage specified objects
on the device, perform all the following steps.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
acl acl-number
A basic ACL is created to filter the NM station users that can manage the device.
Step 3 Run:
rule [ rule-id ] { deny | permit } source { source-ip-address source-wildcard |
any }
A rule is added to the ACL.
Step 4 Run:
quit
Return to the system view.
Step 5 Run:
snmp-agent mib-view { excluded | included } view-name oid-tree
A MIB view is created, and manageable MIB objects are specified.
By default, an NM station has rights to access the objects in the Viewdefault view (1.3.6.1).
l If a few MIB objects on a device or some objects in the current MIB view do not or no longer
need to be managed by the NM station, excluded needs to be specified in the related command
to exclude these MIB objects.
Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management 1 SNMP Configuration
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei Quidway S5700 Series and is the answer not in the manual?

Huawei Quidway S5700 Series Specifications

General IconGeneral
CategorySwitch
Operating Temperature0°C to 45°C
Relative Humidity5% to 95% (non-condensing)
SeriesQuidway S5700
Forwarding PerformanceUp to 96 Mpps
Ports24 or 48 x 10/100/1000Base-T ports
Power SupplyAC or DC
Storage Temperature-40°C to 70°C
Fixed GE Ports24 or 48
Uplink Ports4 x GE SFP ports
Routing ProtocolsRIP, OSPF, BGP
ManagementSNMP, RMON, CLI, Web
VLAN4094 VLANs
PoEOptional

Related product manuals