Huawei Quidway S5700 Series User Manual

#
vlan batch 100
#
acl number 2001
rule 5 permit source 1.1.1.2 0
rule 6 deny source 1.1.1.1 0
#
interface Vlanif100
ip address 1.1.2.1 255.255.255.0
#
interface GigabitEthernet0/0/1
port hybrid pvid vlan 100
port hybrid untagged vlan 100
#
interface LoopBack0
ip address 1.1.3.1 255.255.255.255
#
ospf 1
area 0.0.0.0
network 1.1.2.0 0.0.0.255
network 1.1.3.1 0.0.0.0
#
snmp-agent
snmp-agent local-engineid 000007DB7FFFFFFF00001AA7
snmp-agent community write adminnms2 mib-view allexthgmp acl 2001
snmp-agent sys-info contact call Operator at 010-12345678
snmp-agent sys-info version v1 v3
snmp-agent target-host trap address udp-domain 1.1.1.2 params securityname
1.1.3.1
snmp-agent mib-view excluded allexthgmp hwCluster
snmp-agent trap source LoopBack0
snmp-agent trap queue-size 200
snmp-agent trap life 60
#
return
1.5.2 Example for Configuring a Device to Communicate with an
NM Station by Using SNMPv2c
This section provides an example to describe how to configure a device to communicate with
an NM station by using SNMPv2c and how to specify the MIB objects that can be managed by
the NM station.
Networking Requirements
As shown in Figure 1-5, two NM stations (NMS1 and NMS2) and the switch are connected
across a public network. According to the network planning, NMS2 can manage every MIB
object except HGMP on the switch, and NMS1 does not manage the switch.
On the switch, only the modules that are enabled by default are allowed to send alarms to NMS2.
This prevents an excess of unwanted alarms from being sent to NMS2. Excessive alarms can
make faults location difficult. Informs need to be used to ensure that alarms are received by
NMS2 because alarms sent by the switch have to travel across the public network to reach NMS2.
Equipment administrator's contact information needs to be configured on the switch. This allows
the NMS administrator to contact the equipment administrator quickly if a fault occurs.
Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management 1 SNMP Configuration
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
38

Huawei Quidway S5700 Series Specifications

General

Category	Switch
Operating Temperature	0°C to 45°C
Relative Humidity	5% to 95% (non-condensing)
Series	Quidway S5700
Forwarding Performance	Up to 96 Mpps
Ports	24 or 48 x 10/100/1000Base-T ports
Power Supply	AC or DC
Storage Temperature	-40°C to 70°C
Fixed GE Ports	24 or 48
Uplink Ports	4 x GE SFP ports
Routing Protocols	RIP, OSPF, BGP
Management	SNMP, RMON, CLI, Web
VLAN	4094 VLANs
PoE	Optional