Huawei Quidway S5700 Series User Manual

7 RMON Configuration
About This Chapter
This chapter describes how to monitor the Ethernet interface through Remote Network
Monitoring (RMON).
7.1 Introduction to RMON
This part describes working principles of RMON.
7.2 RMON Suported by the S5700
This part describes the support for RMON on the S5700.
7.3 Configuring RMON
This section describes how to monitor the network status and traffic through RMON.
7.4 Maintaining RMON
When an RMON operation fault occurs, you can run the debuggingcommand in the user view
to locate the fault and analyze its cause.
7.5 Configuration Examples
This section provides several configuration examples of RMON and RMON2.
Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management 7 RMON Configuration
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
390

Huawei Quidway S5700 Series Specifications

General

Category	Switch
Operating Temperature	0°C to 45°C
Relative Humidity	5% to 95% (non-condensing)
Series	Quidway S5700
Forwarding Performance	Up to 96 Mpps
Ports	24 or 48 x 10/100/1000Base-T ports
Power Supply	AC or DC
Storage Temperature	-40°C to 70°C
Fixed GE Ports	24 or 48
Uplink Ports	4 x GE SFP ports
Routing Protocols	RIP, OSPF, BGP
Management	SNMP, RMON, CLI, Web
VLAN	4094 VLANs
PoE	Optional