Huawei Quidway S5700 Series User Manual

1.4.3 (Optional) Controlling the NM Station's Access to the Device
This section describes how to specify an NM station and manageable MIB objects for SNMPv3-
based communication between the NM station and managed device to improve communication
security.
Context
If a device is managed by multiple NM stations that are in the same SNMPv3 user group, note
the following points:
l If all the NM stations need to have rights to access the objects in the Viewdefault view
(1.3.6.1), skip the following steps.
l If some of the NM stations need to have rights to access the objects in the Viewdefault view
(1.3.6.1), skip Step 5.
l If all the NM stations need to manage specified objects on the device, skip Steps 2, 3, and
4.
l If some of the NM stations need to manage specified objects on the device, perform all the
following steps.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
acl acl-number
A basic ACL is created to filter the NM station users that can manage the device.
Step 3 Run:
rule [ rule-id ] { deny | permit } source { source-ip-address source-wildcard |
any }
A rule is added to the ACL.
Step 4 Run:
quit
Return to the system view.
Step 5 Run:
snmp-agent mib-view { excluded | included } view-name oid-tree
A MIB view is created, and manageable MIB objects are specified.
By default, an NM station has rights to access the objects in the Viewdefault view (1.3.6.1).
l If a few MIB objects on the device or some objects in the current MIB view do not or no
longer need to be managed by the NM station, excluded needs to be specified in the command
to exclude these MIB objects.
l If a few MIB objects on the device or some objects in the current MIB view need to be
managed by the NM station, included needs to be specified in the command to include these
MIB objects.
Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management 1 SNMP Configuration
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
30

Huawei Quidway S5700 Series Specifications

General

Category	Switch
Operating Temperature	0°C to 45°C
Relative Humidity	5% to 95% (non-condensing)
Series	Quidway S5700
Forwarding Performance	Up to 96 Mpps
Ports	24 or 48 x 10/100/1000Base-T ports
Power Supply	AC or DC
Storage Temperature	-40°C to 70°C
Fixed GE Ports	24 or 48
Uplink Ports	4 x GE SFP ports
Routing Protocols	RIP, OSPF, BGP
Management	SNMP, RMON, CLI, Web
VLAN	4094 VLANs
PoE	Optional