Huawei Quidway S5700 Series User Manual

Context
CAUTION
Restarting an NQA test instance interrupts the running of tests.
Procedure
Step 1 Run the system-view command, enter the system view.
Step 2 Run the nqa test-instance admin-name test-name command, enter the NQA test instance view.
Step 3 Run the restart command in the NQA instance view to restart an NQA test instance.
----End
6.26.2 Clearing NQA Statistics
When the statistics on the current test instance are saved to the FTP server, you can clear test
results on the device.
Prerequisite
NQA statistics cannot be restored after you clear them. So, confirm the action before you use
the command.
Context
NOTE
Statistics about the test being performed cannot be cleared.
Procedure
Step 1 Run the system-view command, enter the system view.
Step 2 Run the nqa test-instance admin-name test-name command, enter the NQA test instance view.
Step 3 Run the clear-records command in the NQA view to clear history statistics on NQA tests and
test results.
----End
6.26.3 Debugging NQA
This part describes how to debug test instances.
Prerequisite
When a fault occurs, run the following debugging command in the user view to debug NQA
and locate the fault.
Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management 6 NQA Configuration
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
333

Huawei Quidway S5700 Series Specifications

General

Category	Switch
Operating Temperature	0°C to 45°C
Relative Humidity	5% to 95% (non-condensing)
Series	Quidway S5700
Forwarding Performance	Up to 96 Mpps
Ports	24 or 48 x 10/100/1000Base-T ports
Power Supply	AC or DC
Storage Temperature	-40°C to 70°C
Fixed GE Ports	24 or 48
Uplink Ports	4 x GE SFP ports
Routing Protocols	RIP, OSPF, BGP
Management	SNMP, RMON, CLI, Web
VLAN	4094 VLANs
PoE	Optional