Huawei Quidway S5700 Series User Manual

cluster
The cluster view is displayed.
Step 3 Run:
delete-member member-number
A member switch is deleted from the cluster.
----End
3.3.8 Checking the Configuration
After configuring basic HGMP functions, you can view the configuration.
Prerequisite
The configurations of the Basic HGMP are complete.
Procedure
l Run the display ndp to check the NDP configuration in the system view.
l Run the display ndp interface { interface-type interface-number [ to interface-type
interface-number ] }&<1-10> to check the neighbor information detected through NDP on
a specified interface.
l Run the display ntdp to check the global NTDP settings.
l Run the display ntdp device-list [ verbose ] to check the device information collected
through NTDP.
l Run the display cluster to check the status and statistics of cluster.
l Run the display cluster candidates [ mac-address mac-address | verbose ] to check
information about candidate switches.
l Run the display cluster members [ member-number | verbose ] to check information about
member switches.
----End
Example
If the NDP neighbor can be normally established, you can run the display ndp command to
check information about the MAC addresses of all the neighboring stations and the number of
the interface on the neighboring station that is connected to the local interface.
<Quidway> display ndp
Neighbor discovery protocol is enabled.
Neighbor Discovery Protocol Ver: 1, Hello Timer: 60(s), Aging Timer: 180(s)
Interface: GigabitEthernet0/0/1
Status: Disabled, Packets Sent: 0, Packets Received: 0, Packets Error: 0
Interface: GigabitEthernet0/0/2
Status: Enabled, Packets Sent: 114, Packets Received: 108, Packets Error: 0
Neighbor 1: Aging Time: 174(s)
MAC Address : 0018-8203-39d8
Port Name : GigabitEthernet0/0/1
Software Version: VRP 5.70 V100R006C00
Device Name : S5700
Port Duplex : FULL
Product Ver : S5700
Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management 3 HGMP Configuration
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
95

Huawei Quidway S5700 Series Specifications

General

Category	Switch
Operating Temperature	0°C to 45°C
Relative Humidity	5% to 95% (non-condensing)
Series	Quidway S5700
Forwarding Performance	Up to 96 Mpps
Ports	24 or 48 x 10/100/1000Base-T ports
Power Supply	AC or DC
Storage Temperature	-40°C to 70°C
Fixed GE Ports	24 or 48
Uplink Ports	4 x GE SFP ports
Routing Protocols	RIP, OSPF, BGP
Management	SNMP, RMON, CLI, Web
VLAN	4094 VLANs
PoE	Optional