To Next Page

To Previous Page

Installation Manual

Quidway S2000-EI Series Ethernet Switches Chapter 5 BootROM and Host Software Loading

5-2

5.2.1 Boot Menu

Take S2403H-EI Switch as an example. After being powered on, the switch runs the

BootROM program first and displays the following information on the screen:

Starting...

**********************************************

* *

* Quidway S2403H-EI BOOTROM, Version 120 *

* *

**********************************************

Creation Date : Mar 17 2004, 18:05:26

CPU Type : ARM

CPU Clock Speed : 50MHz

Memory Size : 32MB

Initialize LS41LTSU ......................OK! (1)

SDRAM selftest............................OK! (2)

FLASH selftest............................OK! (3)

Slot 1/1 has 100M_EP Selftest OK (4)

Slot 2/1 has no module or get slot type error (5)

PHY selftest..............................OK! (6)

Please check port leds..............finished! (7)

The switch Mac is: 00E0-FC00-0010 (8)

Press Ctrl-B to enter Boot Menu... 5

Press <Ctrl+B>. The system displays:

Password :

 Note:

To access the Boot Menu, you should press <Ctrl+B> within five seconds after the information “Press

Ctrl-B to enter Boot Menu...” appears; otherwise the system will start to decompress the program. At this

time if you want to access the Boot Menu, you will have to restart the switch.

Huawei Quidway S2000-EI Series User Manual

Questions and Answers: