26
Setting the PIN Lock
If the PIN code is activated, you have to enter the PIN code every time you power on the
FWT. Enter the correct PIN code and press
(OK).
To set the PIN code, do as follows:
1. Press
(Menu) and select Phone Settings > Security > PIN.
2. Enter the PIN code.
3. Select On or Off to activate or deactivate the PIN lock.
Changing the PIN Code
When the FWT works normally and the PIN lock is activated, you can change the PIN
code.
1. Press
(Menu) and select Phone Settings > Security > Change PIN Pwd.
2. Enter the PIN code.
3. Then enter the new PIN lock code and PUK code, and press
(OK) to save it.
Caution:
Keep your password in an appropriate place. Do not lose your password or
disclose it to others.
Version
You can press (Menu) and select Phone Settings > Version to check the software
version.
To Next Page
Loading...
