6
3. Wait until the battery is fully charged.
While the battery is charging, the charging icon blinks. When
the charging icon is stops blinking, the battery is fully
charged.
4. Unplug the charger from the power socket and the USB
cable from the phone.
Calibrating the Screen
Press and hold when power on the phone, forced calibration
will be started. Once calibrated, the phone responds more
accurately to your touch on the screen.
1. In standby mode, tap and select > Phone
settings > Pen calibration. During the calibration, a series
of icons are displayed on the screen.
2. During the calibration, a sequence of are displayed on
the screen. Tap the center of each
that appears on the
screen to complete the calibration.
During the calibration, tap each
in a normal way to
ensure that the phone will respond accurately to your
touch.
Accessing Applications
In standby mode, flick your finger left or right to access the
following applications.
To Next Page
Loading...
