8
Phone Lock
The phone lock protects your phone from unauthorized use.
The preset phone unlock code is 1234. By default, the phone
lock is disabled. Once the phone lock is enabled, you must
enter the phone unlock code each time you powered on the
phone.
To enable the phone lock:
1. Tap and select > Security settings > Phone
security > Phone lock.
2. Tap the text box to access the on-screen keypad.
3. Enter the phone code, and tap OK.
To change the present phone unlock code:
1. Tap and select > Security settings > Phone
security > Change password.
4. Tap the text box to access the on-screen keypad.
5. Enter the present phone unlock code, tap OK.
6. Enter a new phone unlock code, and tap OK.
7. Enter the new phone unlock code again to confirm it.
Mass Storage
When the phone is connected to a personal computer (PC)
using a USB cable, Mass storage is displayed on the phone
screen.
In Mass storage mode, you can manage the files stored on the
phone and its microSD card from PC’s file manager utility.
To Next Page
Loading...
