Power adapter input: 100–240 V AC, 50–60 Hz
System power supply: See the nameplate on the device.
Ambient temperature: 0ºC to +40ºC
Ambient humidity: 5%–95% (non-condensing)
For other technical specications, see the following table.
Technical Specifications
GPON Terminal
Weight
(Including the Power Adapter)
Maximum System
Power Consumption
HG8120 series About 315 g ≤5.5 W
HG8045 series About 345 g ≤8 W
HG8240 series About 400 g ≤10 W
HG8245 series About 1000 g ≤15.5 W
HG8247 series About 500 g ≤18 W
HN8055Q About 2000 g ≤36 W
HN8245Q About 2000 g ≤30 W
The appearance shown in this document may be different from the actual appearance of the product.
The actual product provided by the carrier prevails.
Installing the GPON&XG-PON Terminal
1. Do not install PON terminals outdoors or on the outdoor cabinets.
2. PON terminals can be mounted onto a wall or be placed on a workbench.
Do not install PON terminals in other modes, such as the ceiling.
3.The terminal cannot be connected to other devices such as GPON
terminals, switch and router.
4. After the PON terminal is installed with a foot-stand, do not remove the
foot-stand unless it is necessary. When you remove the foot-stand, apply
force evenly on the two sides of the foot-stand to avoid damages to the
PON terminal.
3
To Next Page
Loading...
Need help?
General
