Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
After LTE SIGNAL STRENGTH is steady on, you can start to browse the website. For more
information, go to Status > Help page to check the details.
4.3. WIFI Setting.
1. Turn the Wireless On or Off.
You can go to Wi-Fi > Basic in the Web GUI, select Enable Wi-Fi, and configure wireless
settings and then click Apply. Go to Status > Help page for more information.
2. Activate WPS
You can set up a wireless network with WPS (WiFi Protected Setup) or manually add a client
to your wireless network. Activating WPS helps you quickly set up a wireless network with
strong security.
Using the physical WPS button:
b) Make sure the Power LED is on (not blinking).
c) Press the WPS button more than one second and release it. The WPS LED would
flash while the LTE Device sets up a WPS connection with the wireless device.
To Next Page
Loading...
