5 Your device will automatically display the result.
Drag the end point to ne-tune the measurement result.
Measure Area
Currently, only the area of rectangles can be measured.
1 On the AR Measure screen, touch Area.
2 Frame the object in the viewnder and slowly move your device to locate the plane.
3 When your device identies the object, a frame will appear. After the frame overlaps with
the object, touch
.
4 Your device will automatically display the result.
Drag the end point to
ne-tune the measurement result.
Measure Volume
• Currently, only the volume of cubes can be measured.
• Make sure the object is not placed against a wall. Ensure there is a distance of 1–1.5 m
(3.3–5 ft.) between your device and the object.
1 On the AR Measure screen, touch Volume. Frame the object in the viewnder and slowly
move your device to locate the plane.
2 Point
at the tip of the object's bottom edge and touch to mark the starting
point.
3 Move your device slowly so that travels along the long edge of the object. When it
reaches the end of the edge, touch .
4 Move your device to create a frame for the object's bottom. When the frame overlaps with
the bottom plane, touch .
5 Move your device to create a frame for the whole object. After the frame overlaps with
the object, touch .
6 Your device will automatically display the result.
Drag the tips to ne-tune the measurement result.
Smart Remote
Use Your Device as a Remote Control
Your device uses infrared technology, allowing you to pair it with household appliances in the
Smart Remote app and use it to remotely control appliances such as TVs, air conditioners,
STBs, DVD players, cameras, projectors, and network boxes.
Smart Features
53
To Next Page
Loading...
