Use Portrait Mode to Shoot Portraits
Portrait mode lets you apply beauty and lighting eects to your photos to shoot stunning
portraits.
1 Open Camera and select Portrait mode.
2 Frame your subject within the
viewnder.
To take a sele, touch .
3 You can then:
• Enable beauty eects: Touch and adjust the beauty settings.
To disable the beauty eects, drag the setting to its lowest value, or touch .
• Set lighting eects: Touch and select your preferred eect.
• Light compensation: When you switch to the front camera and the ambient light is
dim, touch the ash icon at the top of the screen to enable light compensation.
Touch the ash icon and select (Auto) or (Always on).
Not all devices support these features.
4 Touch the shutter button to shoot a photo.
Take Night Shots
Night mode gives your photos sharper details and brighter colours even when shooting in
low light or at night.
1 Open Camera and select Night mode.
2 When using the rear camera on some devices, you can manually adjust the ISO sensitivity
and shutter speed by touching
and in the viewnder.
3 Steady your device and touch the shutter button.
4 Your device will adjust the exposure time based on the ambient brightness. Keep your
device steady until the countdown nishes.
You can also touch the shutter button to stop the countdown and immediately take a
photo.
This feature may vary by device.
Take Wide Aperture Photos
Wide aperture mode allows you to shoot photos and videos with a blurred background while
your subject remains in sharp focus.
1 Open Camera or go to Camera > More(depending on your device model) and select
Aperture mode.
Camera and Gallery
39