USB-C to USB-C cable connection
• This connection only applies to ZQE-CAA monitors.
• It is recommended that you use the USB-C to USB-C cable delivered with the monitor.
If a non-standard cable is used, some features may be unavailable.
• The USB-C port of an external device must be a port that supports display, data
transmission, and charging.
• This connection supports charging connected devices, such as laptops or phones.
Connecting to a computer
1 Connect one end of a USB-C to USB-C cable to the USB-C port on the monitor and the
other end to the USB-C port on a computer.
In this connection, you can use the microphone of the monitor.
2 Connect other cables such as power cables for the monitor and computer and then power
on the monitor and computer. If the monitor screen is turned on, it indicates that the
connection is successful.
Connecting to a phone/tablet
1 Connect one end of a USB-C to USB-C cable to the USB-C port on the monitor and the
other end to the USB-C port on a phone/tablet.
2 Connect the monitor to a power supply and press the 5-way directional button upward to
power on the monitor. The screen of the phone/tablet will then be projected on the
monitor. When you perform operations on the phone/tablet, its screen will be
synchronously displayed on the monitor, allowing for a large-screen browsing experience.
Connecting the monitor to a device such as a computer
10
To Next Page
Loading...
Need help?
General
