Set the System Date and Time
If you travel abroad or change your SIM card, your Tablet will automatically display the date and time
provided by the local mobile network. You can also adjust the date and time manually, change the
time format, or set dual clocks on your lock screen.
Open Settings, and go to System > Date & time. From here you can:
l Change the date and time: Enable Set automatically to sync your device's date and time with
that of your mobile network. Disable Set automatically to set your date and time manually.
l Change the time zone: Enable Set automatically to sync your device's time zone with that of
your mobile network. Disable Set automatically to set your time zone manually.
This feature is not supported on Wi-Fi only tablets.
l Change the time format: Enable 24-hour time to set your time format to 24 hours. Disable 24-
hour time to set your time format to 12 hours.
l Set dual clocks on your lock screen: When you are roaming outside of your home country, your
Tablet will automatically display the local date and time provided by the local mobile network.
Enable Dual clocks and set Home city to display dual clocks on your lock screen. One clock will
display the local time and the other clock will display the time in your home country.
This feature is not supported on Wi-Fi only tablets.
Print Documents and Photos from Your Tablet
Connect your Tablet to a printer over Wi-Fi to print out documents and photos with ease.
l Mopria allows you to print directly from your Tablet to a
Mopria-certied printer. The printer
connects to your Tablet over Wi-Fi.
l If your printer is not Mopria-certied, contact the printer manufacturer to obtain a plug-in for
your model.
1 Connect your Tablet and printer to the same Wi-Fi network.
l Connect to your printer's hotspot: If your printer has a wireless hotspot, follow the
instructions in the printer manual to enable the hotspot and set a password. On your Tablet,
open Settings and go to Wireless & networks > Wi-Fi. Enable Wi-Fi, select the printer
hotspot, and then follow the onscreen instructions to establish the connection.
l Connect with Wi-Fi Direct: If your printer supports Wi-Fi Direct, follow the instructions in the
printer manual to enable this feature. On your Tablet, open Settings, and go to Wireless
& networks > Wi-Fi. Enable Wi-Fi, touch
> Wi-Fi Direct, and then select your printer
from the list of detected devices.
l Connect to your router: On your printer, enable Wi-Fi and connect to your home router. On
your Tablet, open Settings and go to Wireless & networks > Wi-Fi. Enable Wi-Fi, select
your router, and then follow the onscreen instructions to complete the settings.
System
52
To Next Page
Loading...
