Huawei Mobile WiFi Pro2 User Manual

1. Touch your device against the NFC sensor on the HUAWEI Mobile WiFi Pro2, as shown
in the following figure.
2. When detection is successful, the HUAWEI HiLink app will automatically open on your
device and you will be connected to Wi-Fi. The Wi-Fi icon should be visible in the status
bar of your device if connection has succeeded.
Note:
* This feature is not available for iOS devices.
* If HUAWEI HiLink is not installed on your device, touching the device against the NFC
sensor on the HUAWEI Mobile WiFi Pro2 will automatically bring up the Choose an action
screen. From here, select New tag scanned (the name of this option may vary by device) and
follow the link to download and install the HUAWEI HiLink app.
* You can also download and install HUAWEI HiLink by scanning the QR code in the
HUAWEI HiLink app section of this manual. Alternatively, search for and download HUAWEI
HiLink in Google Play or the HUAWEI App Center.
Huawei E5885 Wi-Fi extender (optional)
The Wi-Fi extender feature increases Wi-Fi coverage and connects to Wi-Fi networks where
available to reduce mobile data usage.

Huawei Mobile WiFi Pro2 Specifications

General

Model	E5885Ls-93a
Battery Capacity	6400 mAh
Maximum Download Speed	300 Mbps
Wi-Fi Standard	802.11a/b/g/n/ac
SIM Card Slot	Yes
Device Type	Mobile WiFi
Upload Speed	50 Mbps
SIM Card Type	Micro SIM
Operating Temperature	0°C to 35°C
USB Port	Yes
Wi-Fi	Dual-band
Network Type	4G LTE
Max Connected Devices	32
Display	1.45 inch LCD
Storage Temperature	-20°C to
LTE Category	Cat 6
Ports	1 x RJ45, 1 x USB
Dimensions	112.0 x 69.2 x 23.0 mm