Huawei MU609 - Page 22

HUAWEI 30 mm × 30 mm LGA Module
Hardware Migration Guide
LGA Interface Differences
Issue 08 (2016-12-12)
HUAWEI Proprietary and Confidential
Copyright © HUAWEI Technologies Co., Ltd.
22
Table 2-3 Differences of WAKEUP_OUT interface
Pin
No.
Interface
Name
MU509
MC509
MU609
ME209u-526
ME909u
MU709
ME909s
71
Control
WAKEUP
_OUT
CMOS 2.6 V
CMOS 1.8 V
Figure 2-4 The recommended connection of the WAKEUP_OUT pin
R6 depends on the actual DTE requirements.
SLEEP_STATUS
SLEEP_STATUS signal is used to indicate the sleep status of 30 mm × 30 mm LGA
module. The external devices can get to know whether the module is in sleep mode
by reading SLEEP_STATUS pin.

When SLEEP_STATUS pin is in high level, 30 mm × 30 mm LGA modules are in
wakeup state.

When SLEEP_STATUS pin is in low level, 30 mm × 30 mm LGA modules are in
sleep state.
Table 2-4 Differences of SLEEP_STATUS interface
Pin
No.
Interface
Name
MU509
MC509
MU609
ME209u-526
ME909u
MU709
ME909s
15
Control
SLEEP_
STATUS
Reserved
CMOS 1.8 V