Settings
More Connections
Project Your Phone Screen Wirelessly
Project your phone wirelessly to stream movies and work on a large-screen device (such as a
Vision).
The projection method may vary depending on the display device. The following uses
projecting to a HUAWEI Vision as an example.
The gures are for reference only.
1 On the Vision home screen, go to Settings > Connections, and make sure that Projection
is enabled.
2 Swipe down from the upper right corner of the phone screen to display Control Panel,
touch to expand the shortcut switches panel (depending on your device model),
enable Wireless Projection, and follow the onscreen instructions. Your phone will then
start searching for available Vision products.
You can also go to Settings > More connections > Easy Projection or Settings >
More connections > Wireless Projection, and enable Wireless projection (depending
on your device model).
3 Touch the device that you wish to project your phone to from the detected Vision
products.
81
To Next Page
Loading...
