Huawei OceanStor 5500 V3 - Connecting the Storage System to the Network; Directly Connecting Front-End Ports to the Application Server; Network Cable Connection; Optical Fiber Cable Connection

3d
Connecting the storage system to the network
A controller enclosure can be connected to application servers using front-end ports (8 Gbit/s, or 16 Gbit/s
Fibre Channel, 10GE, 10 Gbit/s FCoE, GE electrical, 10GE electrical, or 56 Gbit/s InfiniBand).
10GE electrical interface modules support GE/10GE auto-sensing.
The following figures are an example of cable connections. The details like cable appearance and types of
interface modules may be different from those at your site.
The following figures show the connections by network cables and optical fibers. For details, see OceanStor
2000, 5000, and 6000 V3 Series V300R006 Installation Guide.
Scenario 1 Directly connecting front-end ports to the application server
Network cable connection
 Optical fiber cable connection
17
Application server
Controller enclosure
Application server
Controller enclosure