l System user: Click vStore, select the desired vStore, and click Details to go to the
vStore view. Choose Data Protection > HyperMetro.
l vStore user: In the vStore view, choose Data Protection > HyperMetro.
Step 3 Click the HyperMetro Pair tab.
The HyperMetro Pair management page is displayed.
Step 4 View the basic information about a HyperMetro. Table 5-16 describes related parameters.
Table 5-16 HyperMetro parameters
Parameter
Description Example Value
Local Resource Name Name of a local resource. None
Local Resource ID ID of a local resource. None
Remote Resource Name Name of a remote resource. None
Remote Resource ID ID of a remote resource. None
Pair ID A pair of IDs of local and
remote resources in a
HyperMetro.
None
Pair Health Status Displays whether a pair of
local and remote resources
in a HyperMetro are healthy.
Possible values can be
Normal and Fault.
[Example]
Normal
Pair Running Status Running status of a pair of
local and remote resources.
Possible values can be
Normal, To be
synchronized, Paused,
Synchronizing, Force
Start, and Invalid.
[Example]
Normal
Time Remaining for
Synchronization
Time required for
synchronization to
complete.
NOTE
Some product models and file
systems do not support this
parameter.
[Example]
00:01:29
Link Status Status of a link connected to
a HyperMetro.
[Example]
Connected
OceanStor V3 Series
HyperMetro Feature Guide for File
5 Management
Issue 05 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
162
To Next Page
Loading...
