44
Routine Maintenance Items through NM
Routine Maintenance Items through NM
1. Start/shut down the OptiX iManager network management system
2. Periodically change the login password of the NM user
3. Log in to the NM as a lower-level user
4. Check the NE and board status
5. Check the alarms
6. Monitor the performance events
7. Check the protection switching
8. Query the operation log
9. Check ECC routing
10. Query the NE time
11. Query the board configuration information
12. Backup the NE database
13. Maintain the NM database
14. Maintain the hardware and software platforms of the NM computer
15. Test the remote maintenance function
To Next Page
Loading...
