Need help?Do you have a question about the Huawei OptiX RTN 910A and is the answer not in the manual?
General| Frequency Range | 6-42 GHz |
|---|---|
| Modulation Schemes | QPSK |
| Interface Types | Ethernet, SDH |
| Power Supply | -48 V DC |
| Channel Spacing | 3.5 MHz |
| Management | Web |
| Form Factor | 1U |
Read instructions and precautions to minimize accident possibility.
Installation and maintenance must be performed by trained personnel.
Describes risks associated with high-voltage power and RF signals.
Covers grounding, ESD protection, and battery handling for device safety.
Procedures for attaching lifting lugs, tying ropes, and placing the cabinet.
Final steps for securing the cabinet onto the base.
Procedure for physically installing the RTN 900 unit into the cabinet.
Guide for connecting AC input power to the APM30H cabinet.
Connecting AC power cables to different RTN 900 models.
Connecting DC input power to the TMC11H cabinet.
Connecting DC power cables to RTN 900 within TMC11H cabinet.
Procedure for connecting E1 and Ethernet cables, with cabinet sharing notes.
Guide for connecting IF cables and optical fibers, including precautions.
Connecting signal monitoring cables to CCUB and system control boards.
Connecting cascading cables between RTN 905 devices.
Step-by-step guide for installing battery modules.
Checklist for verifying physical cabinet installation aspects.
Checklist for verifying proper electrical connections and cable management.
Verifying power-on status and securing the cabinet door.
To Next Page