NMS computer
NM_ETH1 NM_ETH2 ETH1 ETH2
3 Connecting NM Cables
You may connect the NM cables in all interface areas of the equipment at the same time. For details,
see the Connecting Clock Cables and Cables in the Interface Area procedure in Installing and
Routing Clock Cables in this document.
NOTE
NOTE
The following figure shows an example to illustrate the NM cable connections. In practice, any of
these subracks can be used as the master subrack. The NM cables are connected in a similar way in
multi-subrack configurations although the number of connected subracks may differ.
To Next Page
Loading...
