115
3 Connecting Clock Cables and Cables in the Interface Area
Universal Platform subrack — Clock cable
Plug the cable into the required
interface.
Opening the Right and Left Interlock Switches in the
Upper Part and then remove the front panel.
Diagonal pliers
Cable tie
Phillips screwdriver
The CLK port and the IN/OUT port cannot be used as the input or output port at the same time. If the CLK port is
used to input or output clock signals, the IN/OUT port cannot be used to input/output clock signals. If the
IN/OUT port is used to input/output clock signals, the CLK port cannot be used to input or output clock signals.
CLK port IN/OUT port
CAUTION
Universal Platform subrack — Cables in the interface area
To Next Page
Loading...
