Huawei OptiX OSN 9560 - Page 20

17
• Power cable connections
If the OptiX OSN 9560 shares a cabinet with the OptiX OSN 7500, the cable distribution plate in the
cabinet must be removed to make enough space to install the OptiX OSN 7500. The power cable for
the OptiX OSN 7500 should be routed along the side panel in the cabinet. You need to connect
cables for four 63 A power inputs, four 63 A power outputs, two 32 A power inputs, and two 32 A
power outputs.
A
A
B
Power output area
Power input area
63 A 63 A 32 A 63 A 63 A 32 A
Power output port
for the OptiX
OSN 9560
Power output port for the
OptiX OSN 7500
Subrack power board
Subrack power
board
B
B
NOTE