No. Item Description
1 On/O Powers the ONT on or o.
2 Power Connects to a power adapter.
3 10G LAN Connects to PC or IP set-top box (STB).
4 OPTICAL The optical port is equipped with a rubber plug and
connected to a ber for upstream transmission.
The type of the optical connector connected to the
optical port can be SC/APC.
5 Reset Press the button for a short time to reset the device; or
press the button for a long time (longer than 10s) to
restore the device to the default settings and reset the
device.
NOTE
Reset Huawei ONTs with caution. Otherwise, the ONTs may
fail to access the Internet. If an ONT cannot access the
Internet after a reset, contact your Internet service provider.
Huawei OptiXstar EN8010Ts-20
Quick Start for QR code 2 Connecting Cables
Issue 01 (2023-03-30) Copyright © Huawei Technologies Co., Ltd. 4
To Next Page
Loading...
