Huawei OptiXstar EN8010Ts-20 - Indicator Description; Indicator Status Overview

3 Indicator Description
Indicator Status Description
Power Steady on The ONT is powered on.
O The power supply is cut o.
PON/LOS See the following table.
10G LAN Steady on The Ethernet connection is in the normal state.
Blinking Data is being transmitted over the Ethernet port.
O The Ethernet connection is not set up.
Status
No.
PON Status LOS Status Description
1 O O The ONT is prohibited by the upper-
layer device or blinks abnormally.
Contact the service provider for help.
2 Blinks twice
a second
Blinks twice a
second
3 Blinks twice
a second
O The ONT attempts to set up a
connection with its upper-layer
device.
4 Steady on O A connection is set up between the
ONT and its upper-layer device.
5 O Blinks once
every 2
seconds
The ONT is not connected to bers
or does not receive optical signals.
Huawei OptiXstar EN8010Ts-20
Quick Start for QR code 3 Indicator Description
Issue 01 (2023-03-30) Copyright © Huawei Technologies Co., Ltd. 5