Huawei P30 Pro - Desktop Mode Connectivity; Connecting Phone to External Display

NFC
Using Bluetooth pairing as an example, enable NFC, Huawei Beam, and Bluetooth on both devices.
Open the Bluetooth pairing scr
een on both devices and place the NFC detection areas of devices close
together. When the sending device plays an audio prompt and content on the screen shrinks, follow
the onscreen instructions and touch the screen on the sending device to establish a Bluetooth
connection
l If ther
e is a Read and write/P2P switch on the NFC screen, ensure it is also enabled. Features
may vary depending on your carrier.
l Not all devices support NFC.
Desktop Mode
Connect Y
our Phone to an External Display for PC-Like Functionality
Carrying your computer from home to the ofce and then back again every day can be tiring.
Wouldn't it be great if you could just use your Phone instead? You can connect your Phone to an
external display using a conversion cable (such as a Type-C to HDMI cable) or through Wireless
projection, and then combine all the benets of a desktop computer, with the convenience of a
Phone.
Connecting your Phone to an external display gives you the following benets:
Device Connection
96