Camera
Basic C
amera Functions
Use Basic Camera Features
Learn about the basic features of your camera to take better photos.
Open
Camera. In the viewnder, touch or press the Volume down button to take a photo.
Select a camer
a mode: Open
Camera and choose a pr
einstalled camera mode in the lower part
of the screen.
Adjust the focal length: In the viewnder, spread two ngers to zoom in or pinch two ngers to
zoom out. When the distance between your device and shooting object is greater than the optical
zoom of the camera, the photo quality decreases. When zooming in or out, a zoom bar will appear on
the side of the screen. You can also adjust the zooming level with the zoom bar.
Adjust the exposure: Your camera will adjust its exposure automatically depending on the ambient
light level. The larger the exposure, the brighter the picture. To manually adjust the exposure, touch
the viewnder screen and drag the
icon up or down.
T
urn on or off the ash: When taking photos in a dark environment, turn on the ash to increase
the ambient brightness. In the viewnder, touch
to select one of the following ash modes:
l Auto: The camer
a automatically determines whether to turn on the ash according to the
ambient light.
l
Off: The ash is disabled.
l On: The
ash is enabled.
l
Always on: The ash
is always on.
Enable or disable Master AI: In the viewnder, touch
to enable or disable Master AI.
Use C
amera to Record Videos
Go to
Camera > V
ideo, then touch
to record a video.
l On the V
ideo screen, go to
> Resolution to select a pr
eferred resolution, such as 4K
UHD, 1080p FHD(60 fps), and 720p HD.
l Stabilizer is supported during video recording at any resolution.
Take a picture while recording: T
ouch
to take a picture while recording.
54