The process of using your wireless charger is as follows:
1 Connect the char
ging cradle to the power supply. Use the charging head and cable that come with
your device, and the wireless charging cradle that you purchased.
2 Place the cradle on the horizontal surface or on the specic area recommended by the
manufacturer.
3 Place the device on the cradle with the screen facing upwards. For optimal performance, place
your device in the center of the cradle or on the specic area recommended by the manufacturer.
4 Y
our device will start charging a few seconds after being placed on the wireless charger, and you
will hear a beep when charging begins. When charging starts, you will see either a
or
icon displayed in the status bar
Huawei wir
eless charging specications: < 42 dBuA/m at 10m.
New Device
25
To Next Page
Loading...
