Quidway
®
S5100-EI Series Intelligent and Resilient Switches Product Specification
Copyright ©2007 Huawei Technologies Co., Ltd. All Rights Reserved.
http://datacomm.huawei.com
3
Attribute S5100-EI
NTP (Network Time Protocol)
BOOTP (Bootstrap Protocol)
Convergence
Quality of
service (QoS)/
Access control
list (ACL)
Packet tagging based on 802.1p or DSCP preference
L2~L4 Packet filter providing filtering based on source/destination MAC
address, source/destination IP address, port, protocol, VLAN, VLAN range,
MAC address range, or invalid frame
Mirroring remote ports (Support RSPAN)
Support priority mapping
Support priority marking
Support traffic statistics
Support port trust mode
Each port supports eight queues
Support SP/SDWRR/SP+SDWRR queue scheduling
Support traffic shaping for ports and queues
Support port-based/flow-based rate limiting, with the minimum granularity of 1
kbps
Support numeral-expressed standard ACL
Support numeral-expressed extended ACL
Support numeral-expressed layer 2 ACL
Support ACL application
Support real-time update of ACL rules based on time range changes
Security
Network Login
Support hierarchical management and password protection of users
Support Centralized MAC address authentication
Support Port isolation
Support MAC address black hole
Support MAC Address Learning Limit
Prevent unauthorized access to the network by binding of MAC and PORT
Support SSH(Secure Shell) v2
Support Port security
Up to 256 users under a single port
Support port-based and MAC address–based authentication
Support MAC address authentication and Fabric synchronization
Support Trunk port authentication
Support IEEE 802.1X user authentication
Version checking (802.1 X supplicant system)
Guest VLAN
802.1 X PEAP/EAP/TLS/TTLS
802.1X
Automatic QoS
ACL filtering
Uplink speed limiting
AAA & Radius
Support AAA authentication
Support RADIUS authentication
To Next Page
Loading...
Need help?
General