Quidway® S5600 Intelligent and Resilient Series Switches Product Specification
Copyright ©2007 Huawei Technologies Co., Ltd. All Rights Reserved.
http://www.huawei.com/products/datacomm/
4
Features S5624P S5624P-PWR S5648P S5648P-PWR S5624F
DHCP Client
DHCP option 60
ARP (Address Resolution Protocol)
NTP (Network Time Protocol)
BOOTP (Bootstrap Protocol)
UDP helper
Convergence
Quality of service
(QoS)/
Access control
list (ACL)
Support bi-directional port rate-limiting, Committed Access Rate (CAR), GE port with
granularity of 64 Kbps and 10GE port with the granularity of 1 Mbps
Eight output queues on each port
Time-based QoS
Packet redirection
Three scheduling algorithms that can be set based on port and queue at the same
time:
• SP (Strict Priority)
• WRR (Weighted Round Robin)
• SP + WRR
Packet tagging based on 802.1p or DSCP preference
L2~L4 Packet filter providing filtering based on source/destination MAC address,
source/destination IP address, port, protocol, VLAN, VLAN range, MAC address range,
or invalid frame
QoS profile management, allowing QoS service scheme customization
Mirroring remote ports (Support RSPAN)
Flow statistics for ACL rules defined using the deny keyword
Improvements made for the depth-first order of ACL matching
DSCP (differentiated services code point) refined when defining ACL rules
Delivering ACLs in RADIUS
To Next Page
Loading...
Need help?
General