Quidway® S5600 Intelligent and Resilient Series Switches Product Specification
Copyright ©2007 Huawei Technologies Co., Ltd. All Rights Reserved.
http://www.huawei.com/products/datacomm/
6
Features S5624P S5624P-PWR S5648P S5648P-PWR S5624F
AAA&Radius
Separated authentication, authorization, and accounting
Authenticated users need to be authenticated again when the device restarts
Delivering of trunk ports and hybrid ports in Tag VLAN is supported when performing
802.1x authentications
The tag authentication method field is added to RADIUS protocol
HWTACACS
Management/ Maintenance
System
Configuration
and Management
Support CLI (Command Line Interface) configuration mode
Support Configuration via the console port
Support Local/Remote configuration via Telnet
Support Remote configuration via modem dial-up
Support System configuration with SNMP v1, 2 and 3
Support SNMP Agent logging
Support HGMP V2
Support RMON (Remote Monitoring) v1, 1/2/3/9 groups of MIBs
Support Quidway network management system
Web-based network management
File system
management and
seven-segment
display
Upgrading all the units of a fabric using the App (or BootROM, Web) files of a unit
Setting an App file of a fabric or a unit of a fabric to be the primary/a secondary
configuration file
Specifying a fabric or a unit of a fabric to use the primary configuration file, a secondary
configuration file, or no configuration file to start.
Performing specific file-related operations for a fabric or a unit of a fabric, such as
deleting files stored in the storage devices of an Ethernet switch, displaying the
information about specified files or directories in the storage devices of an Ethernet
switch, and clearing the recycle bin.
Customizing the password for entering the BOOT menu
To Next Page
Loading...
Need help?
General