Huawei R230D Product Description

R230D&R240D
Product Description 3 Product Features
Issue 02 (2015-10-31) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13
3.2 Network Features
Network features supported by the AP are as follows:

Compliance with IEEE 802.3u

Auto-negotiation of the rate and duplex mode and automatic switchover between the
Media Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X)

Compliance with IEEE 802.1q

SSID-based VLAN assignment

VLAN trunk on uplink Ethernet ports

AP control channel in tagged and untagged mode

DHCP client, obtaining IP addresses through DHCP

Tunnel data forwarding and direct data forwarding

STA isolation in the same VLAN

Access control lists (ACLs)

Link Layer Discovery Protocol (LLDP)

Uninterrupted service forwarding upon CAPWAP channel disconnection

Unified authentication on the AC

AC dual-link backup

IPv6
3.3 QoS Features
QoS features supported by the AP are as follows:

Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to
implement priority-based data processing and forwarding

WMM parameter management for each radio

WMM power saving

Priority mapping for upstream packets and flow-based mapping for downstream packets

Queue mapping and scheduling

User-based bandwidth limiting

Adaptive bandwidth management (the system dynamically adjusts bandwidth based on
the number of users and radio environment to improve user experience)

Airtime scheduling
3.4 Security Features
Security features supported by the AP are as follows:

Open system authentication

WEP authentication/encryption using a 64-bit, 128-bit, or 152-bit encryption key

WPA/WPA2-PSK authentication and encryption (WPA/WPA2 personal edition)

WPA/WPA2-802.1x authentication and encryption (WPA/WPA2 enterprise edition)

Huawei R230D Specifications

General

Brand	Huawei
Model	R230D
Category	Remote Control
Language	English