Huawei SmartAX MA5672 - Installing the MA5672; Workbench Installation; Wall Mounting

3
2 Installing the MA5672
Horizontally placed on a workbench
The following figure shows the MA5672 horizontally placed on a workbench.
Mounted onto a wall
The MA5672 can be mounted horizontally or vertically onto the wall.
Step1
Mark the positions of two holes (with a spacing of 150mm) used for mounting the
MA5672.
Step2
Select a proper drill according to the outer diameter of the screws. Use a hammer drill to
drill the marked positions on the wall. Then clean the wall and install two expansion
bolts.
Step3
Use a screwdriver to fasten the screws (size: M3) into the expansion bolts, leaving the
heads of the screws 3mm over the wall. Then install the MA5672 to the screws.
Horizontal Installation Vertical Installation
1. Do not install MA5672 outdoors or on the outdoor cabinets.
2. The figures shown in this document may differ from the actual product, but the
difference does not affect the functions of the product.